The following tapes were created with the Dos512.rexx program.  Three tapes
had boot blocks on them.  V8Micro has one for an MS0 drive so can't be
used on E11.  V6C boots with the MT0 drive spec, but INIT.SYS doesn't seem
to know who booted it.  V8Sysgnk boots fine.  The V72 tape has [0,1] files
at the end in account [1,3].

Cdcpk1   had 564 files. This tape was the latest files on 11/73.
Custom1  had 616 files.
Custom2  had 260 files.
Custom3  had 535 files.
K11      had 118 files.
V4A      had 370 files.
V6C      had 404 files.
V8Micro  had 224 files.
V8Stf1   had 127 files.
V8Stf2   had 356 files.
V8User   had 271 files.
V8Sysgnk had 364 files.
V8Csp180 had 606 files.
V72      had 360 files, skipped 022 and 104 (errors), add later.
                        (update files on Disk Image DL0[1,5] )

The following tapes were created with the Ansi2048.rexx program.

Ansi1    had 111 files.
Bp2      had 009 files. (Version 2.5 for Rsts V9.5)
V9Lib    had 066 files.

The following tapes were created with a combination of both programs,
modified for creating 2 tape images.  Boot tapes were created with the
DosBoot.rexx program using the first ~10 files from distribution tapes.
These tapes were made with the MGBOOT.SYS boot file, so they will boot.
The ansi tapes were created using the Ansi2048.rexx program and changing
the offsets (from 1-10 or so).  The first 80bytes from V9Lib.001 was
used to create the 240byte header file.

V91Boot  was 002-009 from V91 distribution. (Block 1 from later tape)
V91Ansi  was 010-165 from V91 distribution.
V93Boot  was 001-011 from V93 distribution.
V93Ansi  was 012-170 from V93 distribution.
V94Boot  was 001-011 from V94 distribution.
V94Ansi  was 012-170 from V94 distribution.
V95Boot  was 001-011 from V95 distribution.
V95Ansi  was 012-173 from V95 distribution.

One tape was made with the TImage.rexx program.  This program should
work for any of the tapes created, by using the $BS and $DF files
created by the tape drive utility "dupin."

V9Back   (made with TImage.rexx)